Let's say it simply: LiFeSource packs provide unbelievably long run times between charges!
LiFeSource LiFe (Lithium Iron Phosphate) packs offer you incredible value, because they spread your investment out over lifespans that typically run to 1,000 cycles or more.
And the way they last between charges is just as impressive...
What if:
…you could charge your transmitter once before the weekend — and never during it?
…you could suddenly go three …four…or five times longer between recharges?
…you could put off charging for days…weeks…or even a month without experiencing any loss in performance or putting your model at risk?*
There’s no need to imagine it. You can do these things today, with a battery that costs about the same as the one you use now — a LiFeSource transmitter pack.
*Dependent on frequency of use.
If you’re like these guys, the transmitter battery you use is probably the one that came with your system. Depending on chemistry and capacity, you may get 60 minutes, 75 minutes or more on a charge.
Here’s what a couple of real modelers have to say.
| "After I put a LiFeSource pack in my Futaba® 4PK, I ran it for over 9 hours before I needed to recharge."
-Shane Curry, Team Futaba Surface Team |
 |
 |
"I put a LiFeSource 1500mAh square pack in my Futaba 10C. I recharged after 4 hours 'just to be safe', but found out that my pack still had over half a charge left."
-Chris Sydor, Team Futaba Air Team |
The other advantage of LiFeSource transmitter packs is lightness. LiFeSource packs are lighter than either NiCd or NiMH packs…and with a LiFeSource pack inside, your radio is, too. That means it’s easier and more comfortable to hold from the first — and less fatiguing the longer you hold it.
Longer-lasting and lighter? If that sounds too good to be true, take The LiFeSource Challenge and prove it yourself!
| Click image for more information. |
Applications |
Voltage |
Capacity |
Max Continuous Current: |
Max. Charge Current: |
Dimensions: |
Weight*: |
Stock #: |
 |
Futaba 14SG, 4PK transmitter; receivers |
6.6V |
1900mAh |
1C (1.9A) |
3C (5.7A) |
3.3 x 1.7 x 0.55 in
(83 x 44 x 14 mm) |
4.5 oz
(127 g) |
HCAM6520 |
 |
Futaba 3PK,
4YF & 6EX |
9.9V |
1500mAh |
1C (1.5A) |
1C (1.5A) |
4.4 x 1.9 x 0.50 in (112 x 50 x 13 mm) |
3.0 oz
(85 g) |
HCAM6525 |
 |
Futaba 7C,
8C, 9C & 10C |
9.9V |
1500mAh |
1C (1.5A) |
1C (1.5A) |
3.9 x 1.0 x 1.1 in
(100 x 26 x 27 mm) |
4.6 oz
(130 g) |
HCAM6530 |
Note: Weights shown include wire and connector(s).
Note: LiFeSource battery packs should only be charged using an LiFe-compatible charger and balancer, or LiFe-compatible charger with built-in balancer.
With the right equipment, LiFe charging is easy and economical — and the LiFeSource AC/DC Balancing Charger is both. It starts automatically, lets you select the charging rate — and balance charges 1-3 cell LiFe packs to perfection. To learn more, click here. |
 |
|
LiFe Transmitter Packs 